← All products
Land Cruiser
Toyota Landcruiser 80 / 105 3" plus
Tough Dog · Suspension Kit
Land Cruiser
80 & 105 Series
The King off the road, lifted properly. Pick your lift, pick your shocks, pick your spring rate — priced live as you go.
Ride Height Gauge100mm / 4"
FRONT100mm
REAR100mm
CASTOR3° REQ.
Select Lift Height
Front
Required 2 Ea Shock · 1 Pr Spring
Shock Absorber2 EA
Foam Cell not offered above 100mm — 45mm Adjustable required for 125mm/150mm.
Coil Springs1 PR
Castor Correction Required1
Panhard Rod Required1
Optional Add-ons—
Rear
Required 2 Ea Shock · 1 Pr Spring
Shock Absorber2 EA
Foam Cell not offered above 100mm — 45mm Adjustable required for 125mm/150mm.
Coil Springs1 PR
Panhard Rod Required1
Brake Hose Kit Required1
Your Kit
100mm / 4" — Land Cruiser 80/105
Total
$0.00
Confirm ABS vs non-ABS brake configuration before ordering the rear brake hose kit. Fitting sheet (in-store) must be completed on install — non-compliance may affect warranty.
About this kit
The Tough Dog 80 & 105 Series Land Cruiser kit is built around 45mm bore adjustable shocks and matched coil springs, engineered specifically for the 80 Series and 105 Series wagons. Every component on this page is sourced to the exact Tough Dog application code for your lift height, so front and rear stay matched.
Choose your coil rate based on what the vehicle carries day to day — bar and winch setups need the reinforced "Steel Bar & Winch" spring, everything else runs standard. Castor correction changes spec as the lift increases: 2° at 75mm, 3° at 100mm, and 5° plates from 125mm up. Brake hose kits differ by ABS configuration, so check your vehicle before ordering.
| Application | 80 & 105 Series |
| Years | 05/1990 – 2007 |
| Lift range | 75mm / 100mm / 125mm / 150mm |
| Shock bore | 45mm Adjustable |
| Fitting sheet | Required at install |
Brake hose note
80 Series and 105 Series ABS models need different brake hose kits from non-ABS and from each other — confirm your model and ABS status before checkout.